Buy the appropriate interface cable for the interface you want to use (USB or Network). The interface cable is not a standard accessory.For how to repack the machine, see Packing and shipping the machine in the Advanced User's Guide. The machine should be adequately insured with the carrier. If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit.Please save the original packaging should you need to ship the machine in future.The components included in the box may differ depending on your country.Keep a minimum gap around the machine as shown in the illustration.DO NOT carry the machine by holding it at the bottom. When you move the machine, grasp the side handholds that are under the scanner. To avoid danger of suffocation, please keep these bags away from babies and children and dispose of them properly. Plastic bags are used in the packaging of your machine. Unpack the machine and check the components WARNING indicates a potentially hazardous situation which, if not avoided,Ĭould result in death or serious injuries.ĬAUTION indicates a potentially hazardous situation which, if not avoided, may To view the Quick Setup Guide in other languages, please visit. Then, please read this Quick Setup Guide for the correct setup and installation. Please read the Safety and Legal booklet first before you set up your machine. Restore the network settings to factory default.20 Install MFL-Pro Suite on additional computers (if needed).For Wired Network Interface Users (Mac OS X 10.4.11 - 10.6.x).19 Install MFL-Pro Suite on additional computers (if needed).19 Download and install Presto! PageManager.For USB Interface Users (Mac OS X 10.4.11 - 10.6.x).15 Send in the Product Registration and Test Sheet (USA only).12 Set the telephone line compatibility.11 Set tone or pulse dialing mode (Canada only).
1 Unpack the machine and check the components.I printed user settings and found that no ip was issue. I did read the manual, but there were too many useless information and I did not find any solutions. Seems like the printer itself is not configured to the network correctly, but I might be wrong.
0 kommentar(er)
